This article describes remote configuration of LM048/LM058 Adapter using another Bluetooth Serial Adapter which could be another LM048/LM058 adapter. For Setup procedure please look at the article LM048: Remote Configuration of Serial Adapter via Bluetooth Connection
This article describes remote configuration of LM048/LM058 Adapter using a Bluetooth USB Adapter or in-built Bluetooth of PC/Laptop. For Setup procedure please look at the article LM048: Remote Configuration of Serial Adapter via Bluetooth Connection
A pair of LM048 or LM058 Adapters can be configured to auto-connect to each other when powered up. This procedure is calling Pairing up the adapters. This procedure is ideal when a pair of adapters are used as a serial cable replacement solution. For example a serial cable connection between a POS terminal and label printer can be replaced by a couple of LM048 Adapters paired with each other.
Finding your firmware number
First of all, you will need your Firmware Number, which you can find on the label on the back of your product, as pictured here.
This Firmware Number will identify which configuration software you need to use to configure the device.
Fw: v6.5 or higher requires LM149 Configuration Tool
Fw: v4.22 or lower requires LM049 Configuration Tool
This document explains the procedure to configure LM Technologies Bluetooth Serial Adapters – LM048 and LM058, remotely via Bluetooth. Please note the adapter should be programmed with v6.54.MT firmware for this feature to work. This feature is not supported in the standard v6.54 firmware. Read more