Posts

LM930/931: Connection troubleshooting

/in , /by

If you are experiencing connection issues, check if the UART settings are correct.

The UART settings are fixed as the following:

When using a BLE app to scan for the Serial Server application you must enable the “notification flag” to receive the data from the module.

 

LM930/931: Where to find the source code

/in , /by

The source code is supplied with the purchase of the LM53X development kit. The CSR uEnergy SDK is required to compile and load the source code.

A link to the LM53X product page can be found here.

For further support regarding BLE development please contact LM here.